Known Pulley Ratios & Remote Pairing
Ownboard (table source)
Motor | Belt Spec | Drive Ratio | Wheel Diameter (mm) |
---|---|---|---|
Hub | N/A | N/A | 90/97/100/105 |
5045 | 3M | 3.3 | 83/90 |
6368 | 5M | 2.9 | 120 |
6368 | 5M | 4 | 150 |
Ownboard M1
- Wheel pulley: 60T
- Motor pulley: 18T ? (unsure, didn't count but remote was set to ratio of 3.3)
- Remote pairing instructions: https://youtu.be/YblpPaNdhH8
Missing your board? Leave a comment below and I'll add it to the list!